AUCTION CANCELLED! SETTLEMENT REALIZED

Thank You For All Your Interest! We Have Another Restaurant To Liquidate!

The “Are U Hungry” Restaurant Liquidation Will NOT Be Cancelled!

Learn More

BRGR Restaurant Liquidation

122 West College Avenue State College PA 16801

Due To Utilities Construction On West Calder Way & Kelly Alley Ingress & Egress To Restaurant Will NOT Be Possible Until June 27th. 

**Access To Kelly Alley & Calder Way Confirmed By Phone Call From State College Borough At 8:06AM Tuesday, June 4th.

BRGR Restaurant Auction Delayed

Join Us In State College For This Auction!

We Highly Recommend Attending This Auction In Person!

There Can Be Internet Delays & We Are NOT Responsible For Any Bids Delayed Should The Hammer Fall Before Bid Is Received

Items May Be Removed Upon Fall Of Hammer But Invoice Must Be Shown & Will Be Highlighted By Our Personnel Upon Leaving Building.  An Invoice Of Purchased Items Can Be Printed Anytime During The Auction.  It Will Indicate That It Is UNPAID But Will Be Able To Be Used To Remove Purchased Items.

Remaining Opened & Unopened Liquor & Beer Kegs

Upon Consultation with our Attorney George Michak (Attorney who composed the current Auction Law in Pennsylvania) the remaining opened and unopened liquor bottles, beer bottles & kegs will ONLY be sold to entities or individuals with a valid liquor license.  Individuals bidding on any liquor and beer are responsible for their purchase.  We are NOT liable for any bids and purchases made at auction.  

View Sample Photos Below! 

***There Are Numerous Large Boxes Of All Types Of Alcohol Available At This Auction!  Quite Literally There Is A Truckload Of Boxes Of Liquor Available!

Restaurant Equipment & Furnishings List

Products Purchased New May 2019

WALK IN COOLER/FREEZER

TAFCO – Custom Model No. TAFCO WALK IN FOOD COOLER 9’5″ XlO’ 2″ X 6’6.5″

TAFCO – Custom Model No. TAFCO TAFCO BEER COOLER 7’9″ X 11’2″ X6′ 6.5″

2 – KEG STORAGE RACK John Boos Model No. ALKR-2080-X Keg Rack, 80″W x 20″0 x 76″H, (3) shelves, accommodates (8) kegs loose, mid & bottom shelves are constructed of 1-3/4″ square l:ubii’lg running front-to-back with a load rating of 60 lb/ft2 , top shelf is constructed of 1-3/4″ square tubing running left-to-right with a load rating of 15 lb/ft2, 1-5/16″ dia. post, aluminum construction

1 – ICE CUBER Manitowoc Model No. IYT1500A (CONTACT DISTRIBUTOR FOR AVAILABILllY) Indigo NXT™ Series Ice Maker, cube-style, air-cooled, self-contained condenser, 48″W x 24″0 x 29-1/2″H, production capacity up to 1800 lb/24 hours at 70°/50° (1360 ~ lb AHRI certified at 90°/70°), DuraTech,.. exterior, half dice size cubes, R410 refrigerant, NSF, cULus, CE
Note: Purchased new with WARRANY Info. -ICE-SC 3 year parts & labor (Machine), 5 year parts & labor (Evaporator}, 5 year parts & 3 years labor (Compressor), standard 1 ea (-261) 208-230v/60/1-ph, 15.4 amps

1 – ICE BIN FOR ICE MACHINES Manitowoc Model No. F1300 Ice Bin, 48″W x 31″D, 63-1/2″H, with top-hinged front-opening door, AHRI certified 970 lb ice storage capacity, sliding window & sliding ice gate, welded stainless steel construction, (4) 611 legs, ice scoop, st ainless steel adapters for 30″ or 48″ ice machines
Note: Purchased new with WARRANTY-BIN/DISP 3 year parts & labor warranty, standard

1- WATER FILTRATION SYSTEM, FOR ICE MACHINES Everpure Model No. EV932503 lnsurice• Triple-i40002 System, 36,000 gallon capacity, 5 gpm flow rate, 0.5-micron filtration (3) i40002 cartridges, pressure gauge, flushing valve

WIRE SHELVING

1 – DUNNAGE RACK John Boos Model No. AUB362012-X Ounnage Rack, square bar, 1-tier, 36″W x 20″0 x 12″H, weight capacity 1500 lbs., all welded aluminum construction

8 – Crown Brands, LLC Model No. 22448 – Johnson-Rose – Wire Shelf, 48″W x 24″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

8 – Johnson-Rose – Post, 64 “, grooved at 1” increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish, (adjustable·foot plug removed)

8 – Crown Brands, LLC Model No. 22454 – Johnson-Rose”” – Wire Shelf, 54″W x 24″0, 600 lb. weight capacity, for wet or dry storage, green epoxy finish,

8 – Crown Brands, LLC Model No. 22454 Packed 2 ea – Johnson-Rose”” – Wire Shelf, 54″W x 24″0, 600 lb. weight capacity, for wet or dry storage, green epoxy finish,

12 – Crown Brands, LLC Model No. 22448 Packed 4 ea – Johnson-Rose”” – Wire Shelf, 48″W x 24″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

12 – 21064CAJohnson-Rose – Post, 64″, grooved at 1″ increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish, (adjustable foot plug removed)

16 – Crown Brands, LLC Model No. 21848 Packed 4 ea – Johnson-Rose”‘ -Wire Shelf, 48″W x 18″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

16 – 21072 Johnson-RoseT .. – Post, 72″, grooved at 1″ increments, for wet or dry storage, for wet or dry storage, green epoxy finish,

12 – Crown Brands, LLC Model No. 21842 Packed 4 ea – Johnson-Rose”‘ -Wire Shelf, 42″W x 18″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

12 – 21072 Johnson-Rose”‘ – Post, 72″, grooved at 1″ increments, for wet or dry storage, for wet or dry storage, green epoxy finish,

4 – Crown Brands, LLC Model No. 21836 Packed 4 ea Johnson-Rose- -Wire Shelf, 36″W x 18″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

4 – 21072 Johnson-Rose”‘ – Post, 72″, grooved at 1″ increments, for wet or dry storage, for wet or dry storage, green epoxy finish,

2 UNIVERSAL PAN RACK
Wince Model No. ALRK-20 – Sheet Pan Rack, mobile, full height, (20) 18″ x 26″ or (40) 18″ x 13″ sheet pans capacity, 700 lb. capacity, (4) S” swivel rubber casters, 3″ runner spacing, aluminum, KO, (Qty Break = 1 each)

1 SHELVING, WALL MOUNTED – John Boos Model No. PB-MSS824-X – Utility Shelf, wall-mounted, 24″W x 8″0, Stallion Safety Edge front, 1-1/2″ riser on sides & rear, includes hooks & (2) mop/broom holder·• with locking cam, 16/300 stainless steel, KO

4 – Crown Brands, UC Model No. 21860 Packed 2 ea Johnson-Rose – Wire Shelf, 60″W x 18″0, 600 lb. weight capacity, for
wet or dry storage, green epoxy finish,

4 – 21072CA Johnson-Rose – Post, 72″, grooved at 1″ increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish, (adjustable foot plug removed)

12 – SHELVING
Crown Brands, LLC Model No. 21842 Packed 4 ea Johnson-Rose™ – Wire Shelf, 42″W x 18″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish, NSF

12 – Johnson-Rose™ – Post, 72″, grooved at 1″ increments, for wet or dry storage, for wet or dry storage, green epoxy finish, NSF

8 – WIRE SHELVING Crown Brands, LLC Model No. 22448 Packed 4 ea Johnson-Rose™ – Wire Shelf, 48″W x 24″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish
AND
8 – 21072CA Johnson-Rose™ – Post, 72″, grooved at 1″ increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish, (adjustable foot plug removed}

4 – WIRE SHELVING Crown Brands, LLC Model No. 21854 Packed 2 ea Johnson-Rose™ – Wire Shelf, 54″W x 18″0, 600 lb. weight capacity, for wet or dry storage, green epoxy finish
AND
4 – 21072CA Johnson-Rose™ – Post, 72″, grooved at 1″ increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish, NSF (adjustable foot plug removed)

4 – SHELVING, WALL MOUNTED John Boos Model No. PB-MSS824-X Utility Shelf, wall-mounted, 24″W x 8″0, Stallion Safety Edge front, 1- 1/2″ riser on sides & rear, Includes hooks & (2) mop/broom holder with locking cam, 16/300 stainless steel, KO

CASTERS
13 kt Component Hardware Model No. CSTPK-5PRS Packed 1 kt – Caster Pack, swivel ring stem, medium duty, 5″ diameter, 250 lb. load capacity each, black polyolefln wheel, 2 swivel/2 brake

2 – UNIVERSAL PAN RACK $129.00 Winco Model No. ALRK-20 Sheet Pan Rack, mobile, full height, (20) 18″ x 26″ or (40) 18″ x 13″ sheet pans capacity, 700 lb. capacity, (4) 5″ swivel rubber casters, 3″ runner spacing, aluminum, KO, NSF {Qty Break= 1 each)

1 – WORK TABLE, 48″, STAINLESS STEEL TOP
John Boos Model No. ST6RS-3648GSK Work Table, 48″W x 36″0, 16/300 stainless steel top with 5″ backsplash, with Stallion Safety Edge front, 90° turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, ,
CSA-Sanitation, KO

1 – COMPARTMENT SINK
Turbo Air Model No. TSA-1-N Prep Sink, 1-compartment, 18″ wide x 18″ front-to-back, 13″ deep bowl, ll”H backsplash, 18/304 stainless steel bowl, galvanized gussets & tubular legs with adjustable ABS feet,

1 – WORK TABLE, STAINLESS STEEL TOP
Turbo Air Model No. TSW-3060SB Work Table, 60″W x 30″0, 18/304 stainless steel top with 1-1/2″H rear, up-turn, with adjustable galvanized undershelf & legs with adjustable. ABS bullet feet,

1 – WALL/ SPLASH MOUNT FAUCET
Component Hardware Model No. IlllS-4102-SelZ Top-Line• Faucet, wall mount, 4″ centers, 6″ swivel stainless steel gooseneck spout with 2.2 gpm aerator, lever handles with color-coded indexes, quarter-turn ceramic cartridges, built-in check valve, chromeplated brass faucet body, 1/2″ NPSM male inlets, low lead compliant, ADA Compliant

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1284 Wall Mount Shelf, 12 x 84, 304 stainless steel

2 – HAND SINK
John Boos Model No. PBHS-W-1410-1-SSLR-X Pro-Bowl Hand Sink, wall mount, 14″W x 10″ front-to-back x 5″ deep
bowl, (1) centered splash mount faucet hole, 1-7 /8″ drain opening with basket drain, with left & right side splashes, includes mounting bracket, all stainless steel construction, NSF, CSA-Sanitation (Faucet NOT Included) (FLYER NET PRICING FOR EFFINGHAM AND NEVADA) Standard flyer accessories only, NO modifications to flyer items allowed or their accessories

2 – WALL/ SPLASH MOUNT FAUCET
Component Hardware Model No. KHSlS-4000 TOP-LINE• Economy Hand Sink Faucet, wall mount, 4″ OC, knob handles, 3-1/2″ swivel gooseneck spout, polished chrome plated plastic, double o-ring spout, 2.0 gpm aerator with full flow stream
bubbler, includes: plastic gasket & locking nuts, ADA

1 – SOILED DISHTABLE
John Boos Model No. SDT6-S48GBK-L Pro-Bowl Soiled Dishtable, straight design, 48″W x 30″0 x 44″H overall size, left-to-right operation, (1) 20″W x 20″ front-to-back x 8″ deep pre-rinse sink bowl, lO”H boxed backsplash with 45° top & 2″ return, (1) set of splash mount faucet holes with 8″ centers, 2-1/4″H rolled edge, 16/300 stainless steel top, galvanized legs, bracing, & adjustable bullet feet, SPECIFY DISH MACHINE BRAND AND MODEL. John Boos standard opening is 20-7/8″. Certain dish machines require modification at additional cost not shown here. PB-DTA-20-01 Dish Table Pre-Rinse Basket, with welded slide bar, stainless steel construction, fits 20″ x 20″ pre-rinse sink

1 – DISHTABLE SORTING SHELF
John Boos Model No. BHS1822-TS-X Dlshrack Sorting Shelf, 22″W x 18″0 x 12-1/4″H, wall mounted, slanted, tubular, includes brackets, 16/300 stainless steel, NSF (FLYER NET PRICING FOR EFFINGHAM AND NEVADA)

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1248 Wall Mount Shelf, 12 x 48, 304 stainless steel

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1260 Wall Mount Shelf, 12 x 60, 304 stainless steel

1 – PRE-RINSE FAUCET ASSEMBLY
T&S Brass Model No. B-0133-B Easy lnstall Pre-Rinse Unit, wall mount. base faucet with spring check cart. & lever handles, 2″ dia. flanges with 1/2″ NPT female eccentric flanged inlets, 35-1/2″H, l.S” overhang, $-1/4″ clearance, 18″ riser, (B- 0107) spray valve, B–0044-H flex stainless steel hose, 6″ wall bracket

1 – WALL I SPLASH MOUNT FAUCET
T&s Brass Model No. B-0231 Sink Mixing Faucet, 12″ swing nozzle, wall mounted, 8″ centers on sink faucet with 1/2″ IPS eccentric flanged female inlets, lever handles

1 – CLEAN DISHTABLE
John Boos Model No. CDT6-S48GBK-R Pro-Bowl Clean Dishtable, straight design, 48″W x 30″D x 44″H overall size, left-to-right operation, lO”H boxed backsplash with 45a & 2″ return, 2-1/4″H rolled edge, 16/300 stainless steel top, galvanized legs,
bracing, & adjustable bullet feet, SPECIFY DISH MACHINE BRAND AND MODEL. John Boos standard opening is 20-7/8″. Certain dish machines require modification at additional cost not shown here.

1 – WORK TABLE, 72″, STAINLESS STEEL TOP
John Boos Model No. ST6R5-3072GBK-X Work Table, 72″W x 30″0, 16/300 stainless steel top with 5″ backsplash, with Stallion Safety Edge front, 90° turndown on sides, galvanized legs, bracing, adjustable bullet feet, NSF, CSA-Sanitation, KD (FLYER NET PRICING FOR EFFINGHAM AND NEVADA)

1 – TWO (2) COMPARTMENT SINK Turbo Air Model No. TSA-2-N Prep Sink, 2-compartment, 18″ wide x 18″ front-to-back, 11″ deep bowls, 11″H backsplash, 18/304 stainless steel bowls, galvanized gussets & tubular legs with adjustable ABS feet

1 – WALL/ SPLASH MOUNT FAUCET Component Hardware Model No. Tll13-8112-SE1Z Top-Lines Faucet, wall mount, 8″ (203mm} OC, 1/4 turn ceramic valves, lever handles, 12″ (305mm} horizontal stainless steel swing spout, 2.2 gpm aerated stream aerator, built-in check valve, chrome plated brass body, low lead compliant, ADA Compliant,

1 – WORK TABLE, 48″, STAINLESS STEEL TOP John Boos Model No. ST6RS-3048GSK-X Work Table, 48″W x 30″0, 16/300 stainless steel top with 5″ backsplash, with Stallion Safety Edge front, 90″ turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, NSF, CSA-Sanitation, KO (FLYER NET PRICING FOR EFFINGHAM AND NEVADA)
AND
1 – DR2020SC-S30-X Drawer, for 30″0 work tables, 20″W x 20″ front-toback x 5″ deep, stainless steel front & drawer pan, self-closing, roller bearing slides, NSF, for stainless steel table tops only (FLYER NET PRICING FOR EFFINGHAM AND NEVADA)

1 – DECK MOUNT FAUCET T&S Brass Model No. B-0221 Mixing Faucet, deck mount, 12″ swing nozzle, 8″ centers on deck faucet with 1/2″ IPS eccentric flanged female inlets, lever handles

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1284 Wall Mount Shelf, 12 x 84, 304 stainless steel

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1236
Wall Mount Shelf, 12 x 36, 304 stainless steel

1 – WORK TABLE, WITH PREP SINK(S) John Boos Model No. EPT6RS-3072SSK-L-X Work Table With Prep Sink, 72″W x 30″0 x 40-3/4″H overall size, (1) 16″W x 20″ front-to-back x 12″ deep sink bowl on left, S”H backsplash, includes 10″ swing spout faucet 4″ O.C., 16/300 stainless steel top, stainless steel legs & adjustable undershelf, 1″ stainless steel
adjustable bullet feet, NSF, CSA-Sanitation, KO (FLYER NET PRICING FOR EFFINGHAM & NEVADA)
PBF-4DM-10LF-X Heavy Duty Faucet, deck mount, 10″ swing spout, 4″ centers, 1/4 turn ceramic cartridges, color coded hot/cold indicators, integral check valve, 1/2″ NPT, chrome finish, NSF, cCSAus, ADA Compliant (LEAD FREE FAUCET)
1 kt PB-DMMK Deck Mount Faucet Mounting Kit, includes (2) 1/2″ supply nipples, (2) retainer nuts, (2) lock washers and (2) rubber washers

2 – HAND SINK
John Boos Model No. PBHS-W-1410-1-SSLR-X Pro-Bowl Hand Sink, wall mount, 14″W x 10″ front-to-back x 5″ deep bowl, (1) centered splash mount faucet hole, 1-7/8″ drain opening with basket drain, with left & right side splashes, includes mounting bracket, all stainless steel construction, NSF, CSA-Sanitation (Faucet NOT Included) (FLYER NET PRICING FOR EFFINGHAM AND NEVADA) 2 flyer accessories only, NO modifications to flyer items allowed or their accessories

2 – WALL/ SPLASH MOUNT FAUCET
Component Hardware Model No. KHS15-4000 TOP-LIN Ee Economy Hand Sink Faucet, wall mount, 4″ OC, knob handles, 3-1/2″ swivel gooseneck spout, polished chrome plated plastic, double o-ring spout, 2.0 gpm aerator with full flow stream bubbler, includes: plastic gasket & locking nuts, ADA

1 – FOOD PROCESSOR, BENCHTOP / COUNTERTOP
Robot Coupe Model No. R301 ULTRA D Series Combination Food Processor, 3.7 liter stainless steel bowl with handle, continuous feed kit with kidney shaped & cylindrical shaped hoppers, includes: (1) “S” blade (27286), (1) 2mm grating disc (27577), (1) 4mm slicing disc (27566), on/off & pulse switch, single speed, 1725 RPM, 120v/60/1-ph, 12.0amps,1-1/2 HP, NEMA 5-15P, cETLus, ETL-Sanitatio
NOTE: Note: Purchased new with 1 year parts & labor warranty

1 – WORK TABLE, 30″, STAINLESS STEEL TOP
John Boos Mociei No. Sl4-2430GSK Work Table, 30″W x 24″0, 14/300 stainless steel flat top, with Stallion Safety Edge front & back, 90° turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, NSF, CSA-Sanitation, KO

2 – PIZZA PREPARATION REFRIGERATOR
Delfield Model No. 18691PTBMP Refrigerated Pizza Table, three-section, 91″ W, 22.82 cubic feet, (11) 1/3 pan capacity, (3) shelves, (2) 27″ doors & (1) 19″ door, 18 gauge stainless steel top, refrigerated pan rail, stainless steel ends, 6″ casters, side-mounted refrigeration system, R290 Hydrocarbon refrigerant, (2} 1/5 hp, cUL, UL, NSF 7
NOTE: Note: Purchased new with 3 year parts & labor warranty, standard W00003AN 5 year compressor warranty, standard 115v/60/1-ph, 6.5 amps, NEMA 5-lSP, standard Overshelf, 1811 wide single tier

1 – SERVING COUNTER, HOT FOOD, ELECTRIC
Duke Manufacturing Model No. E303SW Aerohot Hot Food Station, electric, 44-3/S”W x 22-7/16″0 x 34″H, (3) 1r x 20″ sealed hot food wells with Individual drains with valves, infinite controls, stainless steel top with 1/2″ thick x 7″ wide poly carving board, stainless steel open base with undershelf, legs & feet, cULus, UL EPH Classified 208v/60/1-ph, 2250 watts, 10.8 amps, NEMA 6-20P

1 – WORK TABLE, 30″, STAINLESS STEEL TOP
John Boos Model No. ST4-2430GSK Work Table, 30″W x 24″0, 14/300 stainless steel flat top, with Stallion Safety Edge front & back, 90° turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, NSF, CSA-Sanitation, KO

1 – 47/48 Custom Model No. 47 /48
47/48 CUSTOM DISH CABINET AND DOUBLE OVER SHELF

2 – DISH CABINET
John Boos Model No. 4DC04-15132 Dish Cabinet, open front, 132″W x 15″D x 35″H, 14/300 stainless steel top, 18/430 stainless steel body, open base with stainless steel midshelf,stainless steel legs & adjustable bullet feet

4 – X-000283 Electrical Outlet Box, single pedest al, mount to w-urk table (box & face plate ONLY)

4 – HEAT LAMP
Hatco Model No. GRAH-4203 Glo-Ray• Infrared Foodwarmer, high wattage, tubular metal heater rod, double heater rod housing 3″ spacing, aluminum construction, 1900 watts, NSF, cUL, UL
NOTE: Purchased new with One year on-site parts and labor warranty, plus one additional year
parts only warranty on all Glo-Ray metal sheathed elements 208v/60/1-ph BLT TOG-1 (1) Built-in toggle control (remote recommended) (Available at time of purchase only) STANDARD Clear Anodized Aluminum, standard (Available at time of
purchase only) 24 ft CHAIN 1 Chain Suspended, per foot

1 – HEAT LAMP
Hatco Model No. GRAH-3603 Glo-Ray• Infrared Foodwarmer, high wattage, tubular metal heater rod, double heater rod housing 3″ spacing, aluminum construction, 1600 watts, NSF, cUL, UL
NOTE: Purchased new with Sale of this product must comply with One year on-site parts and labor warranty, plus one additional year parts only warranty on all Glo-Ray metal sheathed elements 208v/60/1-ph BLT TOG-1 (1) Built-in toggle control (remote recommended) STANDARD Clear Anodized Aluminum, standard (Available at time of 6 ft CHAIN 1 Chain Suspended, per foot

1 – SANDWICH/ SALAD PREPARATION REFRIGERATOR
Turbo Air Model No. MST-28-N M3 Series Sandwich/Salad Unit, one-section, rear mount selfcontained compressor, 7.0 cu. ft., 8-pan top opening with hood, (1) field reversible swing door, (1) PE coated wire shelf, 9-1/2″ deep cutting board with side rail, digital temperature control, self-cleaning condenser, cold bunker system, stainless steel top, front & sides (galvanized steel back & bottom), aluminum interior, stainless steel floor & ABS door liner, LED Interior lighting & fan control, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1-ph, 2.8 amps, NEMA 5-lSP, cETLus, ETL-Sanitation
Note: Purchased new with 3 year parts & labor warranty, standard Additional 2 year compressor warranty (5 year total}, standard Self-cleaning condenser device equipped, standard Door hinged on right, standard 1/6 size, 4″ deep condiment pan & pan dividers included, standard

1 – MIXER, DRINK/ BAR
Waring Model No. WDM360 Drink Mixer, counter top, triple spindle, 13·1/4″W x 13-1/2″0 x 21- 1/2″H, (3) speed (16,000, 22,000, 25,000 RPM), momentary pulse switch at selected speed, automatic start/stop, butterfly & propeller agitators, replaceable commercial motor, heavy-duty die-cast housing, (3) stainless steel malt cups included, 1HP, 120v/60/1-ph, 360 watts, 3
amps, NSF, cETLus
Note: Purchased new with 1 year limited warranty, standard

1 – UNDERCOUNTER REFRIGERATOR
Turbo Air Model No. JUR-36-NG J Series Side Mount Undercounter Refrigerator, one-section, 6.37 cu. ft., front breathing, side mount self-contained compressor, {1) stainless steel door with recessed handle, (1) PE coated wire shelf, LED interior lighting, hot gas condensate system, stainless steel exterior (galvanized steel back & bottom), aluminum interior & door liners with stainless steel floor, R600a Hydrocarbon refrigerant, 1/6 HP, 115v/60/1-ph, 1.7 amps, NEMA 5-lSP, cETLus, ETL-Sanitation,
ENERGY STAR•
Note: Purchased new with 2 year parts & labor warranty, standard Additional 3 year compressor warranty (5 y@ar t otal), standard Door hinged on right, standard

1 – SOFT SERVE MACHINE
Stoelting Model No. Elll-371-A Soft-Serve Freezer, counter top, 15-1/8″W x 28-7 /8″0 x 35-5/8″H, air cooled, (1) flavor, gravity, 13.6 quart hopper, & 2.6 quart freezing cylinder, digital microprocessor controls, self-closing spigot, low mix light, stainless steel exterior, 3,550 BTU/hour compressor, 3/4-hp motor, 115v/60/1-ph, 14amps, cord with NEMA 5-20P, UL, cUL,
Note: Purchased new with 1 year parts & labor warranty, standard (US Only) 5 year warranty on compressor, evaporator/hopper assembly, drive motor, speed reducer, auger shaft & auger flights (against breakage)
Standard Elll-371-A/START-UP FEE Factory Start-up Fee, for Elll-371-A (net) 2149238 3A Carb Assembly, 3/16″ hole, standard size, for models Elll & F111 (included)

1 – WORKTOP FREEZER
Turbo Air Model No. 1WF-48SD-N Super Deluxe Worktop Freezer, two-section, 12.0 cu. ft., self-cleaning condenser equipped, LED interior lighting, (2) stainless steel doors with recessed handles, stainless steel interior & exterior, ABS door liner, (2) stainless steel wire shelves, LED interior lighting, selfcontained rear mounted refrigeration system, R290 Hydrocarbon refrigerant, 1/3 HP, llSv/60/1-ph, 2.4 amps, NEMA 5-lSP, cETLus, ETLSanitation, ENERGY STAR•
Note: Contact factory representative for parts and accessories
discounts
Note: Purchased new with 3 year parts & labor warranty, standard Additional 2 year compressor warranty (5 year total), standard Self-cleaning condenser device equipped, standard. Left door hinged left, right door hinged right, standard

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1296 Wall Mount Shelf, 12 x 96, 304 stainless steel

8 – WIRE SHELVING
Crown Brands, LLC Model No. 22430 Packed 4 ea Johnson-Rose – Wire Shelf, 30″W x 24″D, 800 lb. weight capacity, for wet or dry storage, green epoxy finish,

8 – 21072CA Johnson-Rose1M – Post, 72″, grooved at 1″ increments, for pop-in caster application, for wet or dry storage, for wet or dry storage, green epoxy finish (adjustable foot plug removed)

2 – SHELVING, WALL MOUNTED Turbo Air Model No. TSWS-1260 Wall Mount Shelf, 12 x 60, 304 stainless steel

4 – WIRE SHELVING Crown Brands, LLC Model No. 21836 Packed 4 ea Johnson-Rose™ -Wire Shelf, 36″W x 18″0, 800 lb. weight capacity, for wet or dry storage, green epoxy finish
AND
21072 Johnson-RoseTM – Post, 72″, grooved at 1″ increments, for wet or dry storage, for wet or dry storage, green epoxy finish

1 – CAN RACK Winholt Equipment Model No. CR-162 Rack, Can Storage, stationary design, self feeding gravity fed shelves, holds {162) #10 cans or (216) #5 cans, 1-1/2″ welded aluminum tubing, 25 1/4″W, 35″0, 71″H

1 – REACH-IN FREEZER – Turbo Air Model No. M3F19-l-N – M3 Freezer, reach-in, one-section, 18.44 cu. ft., exterior LED digital thermometer, door open beep, self-diagnostic monitoring system, hot gas condensate system, smart fuzzy defrost, automatic fan motor delays, door pressure release, LEO interior lighting, self-cleaning condenser device, (1) hinged solid door with recessed handle & lock, field reversible, (3) PE coated wire shelves, stainless steel front & sides (galvanized steel top, bottom & back), aluminum interior with stainless steel floor, top mount self-contained compressor, R290 Hydrocarbon refrigerant, 3/8HP, 115v/60/l-ph, 4.5 amps, NEMA 5-lSP cETLus, ETL-Sanitation, ENERGY STAR
Note: Purchased new with 3 year parts & labor warranty, standard, Additional 2 year compressor warranty (5 year total), standard, Self-cleaning condenser device equipped, standard, Door hinged on right (field reversible), standard
1 – CONVECTION OVEN, ELECTRIC Southbend Model No. EH/lOSC MarathonerGold Convection Oven, electric, half size, standard depth, single deck, solid state thermostat, 60 minute timer, two speed, fan motor, single door with window, porcelain oven interior, stainless steel front, sides & top, 4″ legs, 1/2 HP, 7.5 kW, CSA, NSF (Note: Qualifies for Southbend’s Service Flrst1111 Program, see Service First document for details). 26″ High stainless steel legs with casters, in lieu of std. legs
Note: Purchased new with Standard three year limited warranty.

1 – REFRIGERATED WORKTOP $2,521.61 lea lea lea 1 ea lea lea lea lea Turbo Air Model No. TWR-6050-N Super Deluxe Worktop Refrigerator, two-section, 16.0 cu. ft., selfcleaning condenser equipped, (2) stainless steel doors with recessed handles, stainless steel interior & exterior, ABS door liner, (2) stainless steel wire shelves, self-contained rear mounted refrigeration system, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1- ph, 2.4 amps, NEMA 5-lSP, cETLus, Ell-Sanitation
Note: Purchased new with 3 year parts & labor warranty, standard Additional 2 year compressor warranty (5 year total), standard Self-cleaning condenser device equipped, standard Left door hinged left, right door hinged right, standard 3 year parts & labor warranty, standard Additional 2 year compressor warranty (5 year total), standard Self-cleaning condenser device equipped, standard Left door hinged left, right door hinged right, standard

1 – CAN OPENER $125.00 Edlund Model No. 1 Packed3 ea Can Opener, manual, #lTM with plated base (for cans up to 11″ tall) “Old Reliable”1111
Note: Purchased new with 1 year limited warranty, standard

1 – FOOD SLICER, ELECTRIC lea Globe Model No. 513 Premium Heavy Duty Slicer, manual, 13″ steel knife, top-mounted removable sharpener with synthetic diamond surfaces, knife cover interlock, kickstand, seamless anodized aluminum base, 1/2 HP knife motor, llSv/60/1-ph, 2.0 amps, NEMA 5-lSP, cETLus, ETL-Sanitation, Made in USA (Replaces 3600N; with frozen option replaces 3600NF)
Note: Purchased new with 1-year parts & labor warranty (excludes wear/expendable parts) (contact factory for details)

1 – WORK TABLE, 72″, STAINLESS STEEL TOP John Boos Model No. ST6R5-3072GSK-X Work Table, 72″W x 30″D, 16/300 stainless steel top with S” backsplash, with Stallion Safety Edge front, 90° turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, NSF, CSA-Sanitation, KD
AND
1 DR2020SC-S30-X Drawer, for 30″0 work tables, 20″W x 20″ front-toback x S” deep, stainless steel front & drawer pan, self-closing, roller bearing slides, NSF, for stainless steel table tops only

1 – WORKTABLE, 30″, STAINLESS STEEL TOP John Boos Model No. ST6RS-3030GSK-X Work Table, 30″W x 30″0, 16/300 stainless steel top with 5″ backsplash, with Stallion Safety Edge front, 90° turndown on sides, galvanized legs & adjustable undershelf, adjustable bullet feet, NSF, CSA-Sanitation, KD

1 – SANDWICH/ SALAD PREPARATION REFRIGERATOR
Turbo Air Model No. MST-28~N – M3 Series Sandwich/Salad Unit, one-section, rear mount self-contained
compressor, 7.0 cu. ft., 8-pan top opening with hood, (1) field reversible swing door, (1) PE coated wire shelf, 9-1/2″ deep cutting board with side rail, digital temperature control, self-cleaning condenser, cold bunker system, stainless steel top, front & sides (galvanized steel back & bottom), aluminum interior, stainless steel
floor & ABS door liner, LED interior lighting & fan control, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1-ph, 2.8 amps, NEMA 5-lSP, cETlus, ETL-Sanitation
Note: Purchased new with 3 year parts & labor warranty, standard. Additional 2 year compressor warranty (5 year total), standard. Self-cleaning condenser device equipped, standard. Door hinged on right, standard, 1/6 size, 4″ deep condiment pan & pan dividers included, standard

3 – GAS FLOOR FRYERS
Pitco Frialator Model No. SG14-S – Solstice,.. Fryer, gas, floor model, full frypot, 40-50 lb. oil capacity, millivolt control ONLY, stainless steel tank, front, door & sides, 110,000 BTU, , CE, CSA Flame, CSA Star, AuGA (free standing, stand alone
only fryer)
Note: Purchased new with 1 year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard Gas to be determined P6072145 Basket, (2) oblong/twin size, 13-1/2″ x 6-1/2″ x 5-1/2″ deep, long handle, regular mesh (shipped std (n/c) with models “T” SG14, SG14R, SSHSS, SE14, SE14X, SE14B, SG14T, 35+, 45+, fryer batteries shipped with (1) per fryer 3 st 83901504 Casters, 9″ adjustable swivel (set of 4) non-lock rear & lock front casters, solstice supreme, SG, SE, VF and flat bottom fryers, pasta cookers, rethermalizers, BNB

3 – SAFETY SYSTEM MOVEABLE GAS CONNECTORS
Dormont Manufacturing Model No. 167SKIT48 Packed 1 kt – Dormont Blue Hose™ Moveable Gas Connector Kit, 3/4″ inside dia., 48″ long, covered with stainless steel braid, coated with blue antimicrobial PVC, (1} SnapFast• QD, (1) full port valve (2) go• elbows, coiled restraining cable with hardware, 180,000 BTU/hr minimum flow capacity, limited lifetime warranty

1 – WORK TABLE, STAINLESS STEEL TOP
John Boos Model No. E~3615 Filler Table, 15”W x 36″0, 18/400 stainless steel top with 1-1/2″ backsplash, Stallion Safety Edge front, go• turndown on sides, galvanized legs & adjustable undershelf, plastic bullet feet, , KO

1 – RANGE, 36″, 6 OPEN BURNERS
Garland/US Range Model No. G36-6R. G Starflre Pro Series Restaurant Range, gas, 36″, (6) 33,000 BTU open burners, cast iron top & ring grates, standard oven, includes (1) rack & 3 position rack guides, stainless steel front, sides, plate rail, 2-piece
back guard and shelf, 611 stainless steel legs with adjustable feet, 236,000 BTU, CSA Flame, CSA Star, cCSAus, (Garland)
Note: Purchased new with One year limited parts and labor warranty, covers products purchased and installed in the USA only, standard Gas type to be specified Adjustable height swivel casters with front brakes (set of 4)

1 – GAS COUNTERTOP GRIDDLE
Garland/US Range Model No. GTGG48-GT48M – Griddle, countertop, gas, heavy-duty, 47-1/4″ W x 23″ D cooking surface, 1″ thick smooth steel griddle plate, snap action thermostatic controls, piezo pilot igniters, 4″ deep front grease trough, stainless
26A steel front, sides and back, 4″ adjustable feet, 112,000 BTU (Garland), , CSA Star, CSA Flame
Note: Purchased new with One year limited parts and labor warranty, covers products purchased and installed in the USA only, standard. Gas type to be specified

2 – CHEESEMELTER, GAS
Garland/US Range Model No. IRCMA-36 – Cheesemelter, gas, 36″, (1) infrared burner, manual control, removable chrome-plated wire rack, stainless steel front, top & sides, 30,000 BTU, CSA, (U S Range)
Note: Purchased new with One year limited parts and labor warranty, covers products purchased and Installed in the USA only, standard Gas type to be specified WALL KIT Wall mount kit (with original equipment only)

1 – EQUIPMENT STAND, REFRIGERATED BASE
Turbo Air Model No. TCBE-96SDR-N – Super Deluxe Chef Base Refrigerator, 18.6 cu. ft. side mounted self-contained refrigeration system, self-cleaning condenser device, (4) durable drawers with recessed handles, (72) pan capacity (1/6 size), 16
ga. stainless steel one-piece reinforced insulated top, stainless steel front & sides, digital temperature display, R290 Hydrocarbon refrigerant, 3/8 HP, 115v/60/1-ph, 4.9 amps, NEMA 5-15P, cETlus, ETLSanitation
Note: Purchased new with 3 year parts & labor warranty, standard, Additional 2 year compressor warranty (5 year total), standard 4″ Swivel casters set, locks on the front, 5″ height, standard

1 – CHARBROILER, GAS, COUNTERTOP
Garland/US Range Model No. HEEGM48CL Broiler, 3/4″ gas regulator, generic version, 48″ W x 38-1/16″ D x 18- 1/16″ H, (9) cast iron burners with individual cast iron radiants, cast iron grates, spark ignition, front rail with removable 1/3 size food pan cut-outs, large capacity removable drip pans/water pans, power switch, stainless steel exterior, 130,500 BTU, 9 ft cord & NEMA 5-lSP, , CSA
Note: Purchased new with One year limited parts and labor warranty, covers products purchased and installed in the USA only, standard. Gas type to be specified. 120v/50/60/1-ph, 0.22 amps, NEMA 5-lSP, 9′ cord, standard

1 – TOASTER, CONTACT GRILL, CONVEYOR TYPE
APW Wyott Model No. M-95-3 Bun Grill Conveyor Toaster, electric, countertop, (1300) bun halves/hour capacity (35 second gear), thermostatic control, wet or dry operation, low-profile vertical conveyor, butter roller & pan, stainless
steel construction, 4″ adjustable legs, cULus, , CE
Note: Purchased new with 1 year parts & labor warranty, standard 208v/60/1-ph, 2780 watts, 13.4 amps, NEMA 6-20P, standard 35 Second gear speed, standard

3 – SAFETY SYSTEM MOVEABLE GAS CONNECTOR
Dormont Manufacturing Model No. 1675KIT48 Packed 1 kt Dormont Blue HoseTI•• Moveable Gas Connector Kit, 3/4″ inside dia., 48″ long, covered with stainless steel braid, coated with blue antimicrobial PVC, (1) SnapFast• QD, (1) full port valve (2) 90• elbows, coiled restraining cable with hardware, 180,000 BTU/hr minimum flow capacity, limited lifetime warranty

1 – WARMING DRAWER, FREE STANDING
Hatco Model No. HOW-2 Warming Drawer Unit, Free Standing, two drawers, includes (1) standard 6″ deep food pan per drawer per drawer, stainless steel construction, thermostatic controls, 4″ legs, NSF, cULus, Made in USA
Note: Purchased new with 2-Yr Warranty on drawer warmer heating elements against burnout,
Standard 2-Yr Warranty on drawer slides & rollers against breakage, standard. 120v/60/1-ph, 900 watts, 7.5 amps, NEMA 5-15P (Domestic voltage), standard. STANDARD Stainless Steel Drawer Front, standard (Available at time of purchase only) 1 Standard drawer pan. 1 Standard drawer pan

1 – UNOERCOUNTER REFRIGERATOR
Turbo Air Model No. MUR-28—N M3 Series Undercounter Refrigerator, one-section, 6.8 cu. ft., selfcontained rear mount refrigeration system with self-cleaning condenser, (1) swing door, field reversible, (1) adjustable heavy duty PE coated wire shelf, stainless steel top, front & sides, (galvanized steel back & bottom) aluminum interior, stainless steel floor, LED interior lighting & fan control, R290 Hydrocarbon refrigerant, 1/5 HP, llSv/60/1-ph, 2.2 amps, NEMA 5-lSP, cETLus, Ell-Sanitation
Note: Purchased new with 3 year parts & labor warranty, standard Additional 2 year compressor warranty (5 year total), standard Self-cleaning condenser device equipped, standard Door hinged on right (field reversible), standard

1 – Custom Model No. FRT INBOUND FREIGHT FOR GLASSTENDER

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1248 Wall Mount Shelf, 12 x 48, 304 stainless steel

1 – SHELVING, WALL MOUNTED
Turbo Air Model No. TSWS-1260 Wall Mount Shelf, 12 x 60, 304 stainless steel

1 – HAND SINK
Glastender Model No. HSB-12 Underbar Hand Sink Unit, free standing, 12″W x 24″0, 9-1/4″ wide x 11-1/2″ front-to-back x 6″ deep bowl, 7″H backsplash, deck mount faucet (low lead compliant), stainless steel construction, legs with adjustable
bullet feet, Ell-Sanitation, NSF/ANSI 61, Annex G 1 LSB-D Splash, left end, 24″ deep 1 RSB-0 Splash, right end, 24″ deep. 1 Aerator, faucet, 2.0 GPM, standard
Note: Purchased new with 1 year parts & labor warranty

1 – UNDERBAR SINK UNITS
Glastender Model No. TSA-60-S Underbar Sink Unit, three compartment, 60″W x 19″0, 7″H backsplash, 11″ wide x 14″ front-to-back x 10-1/4″ deep sink compartments, 12″ drainboards on left & right with removable perforated inserts, splash
mount faucet (low lead compliant), includes (3) overflow standpipes, stainless steel construction, stainless steel legs with adjustable bullet feet, ETL-Sanitation. 1 Aerator, faucet, 2.0 GPM, standard
Note: Purchased new with 1 year parts & labor warranty

1 – SPEED RAIL/ RACK
Glastender Model No. SSR-60 Single Speed Rail, 60″W, open step-and-rail design, ABS sounddeadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation
Note: Purchased new with 1 year parts & labor warranty

4 – GLASS FROSTER $2,201.82
Glastender Model No. MF36-S Underbar Glass Froster, 36″W x 24″0, self-contained refrigeration, 12°F (-11°C) to 35°F (2°C) temperature range, (1) top sliding door, includes bottom rack, automatic condensate evaporator, stainless steel interior & exterior, stainless steel top, R404A refrigerant, 1/3 HP, cETLus, ETLSanitation
Note: Purchased new with 1 year parts & labor warranty, 5 year compressor warranty 120v/60/1-ph, 7.1 amps, NEMA 5-15P, standard

1 – DRAINBOARD $385.40
Glastender Model No. DBA-18 Underbar Drainboard, free standing, 18″W x 19″0, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – SPEED RAIL/ RACK
Glastender Model No. SSR-18 Single Speed Rail, 18″W, open step-and-rail design, ABS sound deadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, ETL-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – BACK BAR CABINET, REFRIGERATED $3,196.91
Glastender Model No. C1FB72 Cooler, one zone, front serviced, bar profile, 72″W, three-section, 16″W door opening, self-contained refrigeration, LED interior lighting, front venting, stainless steel interior, R290, 1/4 HP, NSF Standard 7 for open food storage, cEllus, Ell-Sanitation The C1FB72 will NOT hold standard size kegs but it will hold up to (11) 1/6 kegs. A 5# C02 bottle (05000636) with tank mount regulator (REGC02-HP) will fit with (11) 1/6 kegs. See draft system accessories.
Note: Purchased new with 1 year parts & labor warranty, 5 year compressor warranty 120v/60/1-ph, 7.0 amps, standard
Standard 34° to 40°F operation (L) Refrigeration compartment on left side Refrigeration compartment cover finish: Black vinyl-clad, standard Door style, first: Black vinyl-clad, standard Door hinge location, first: Left
Shelving style, first: (3) adjustable shelves, standard Door handle, first: Polished stainless steel, standard Door style, second: Black vinyl-clad, standard Door hinge location, second: Right Shelving style, second: (3) adjustable shelves, standard Door handle, second: Polished stainless steel, standard Door style, third: Black vinyl-clad, standard Door hinge location, third: Right Shelving style, third: (3) adjustable shelves, standard Door handle, third: Polished stainless steel, standard No finished top – galvanized steel sub-top, standard
Back finish: Galvanized steel, standard Left side finish: Black vinyl-clad, standard Right side finish: Black vinyl-clad, standard Bright White (7,000k), standard No legs or casters, standard

1 – CORNER ANGLE FILLER
Glastender Model No. C-IFC-19/19-N CHOICE Underbar Corner Drainboard, 19″ x 19″, corrugated work surface with radius corners, rear corner chamfer stainless steel construction, no legs, Ell-Sanitation (mounts between two adjacent underbar pieces) 1st C-ULEG-2 CHOICE Legs, 16″, set of (2) with bolts

1 – SODA GUN HOLDER & TUBING CHASE
Glastender Model No. SHB-4 Underbar Soda Gun Holder, 4″W x 24″0 x 21″H, built-in holder for soda gun, includes integral drip pan, removable cover for access to soda gun manifold (soda gun not included), must mount to at least one other piece of underbar equipment (no provision for leg mounting), includes clips for mounting, backsplash, front rail, & front skirt to match adjacent equipment, stainless steel construction, ETLSanitation

1 – ICEBIN
Glastender Model No. IBA-30-CPlO Underbar Ice Bin, with 10-circuit cold plate, 30″W x 19″0, 84 lbs. ice capacity, 7″H backsplash, 10-1/2″ deep bin liner, ABS plastic breaker strip around ice bin liner, includes sliding stainless steel bin cover,
stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, ETL-Sanitation
Note: Purchased new with 1 year parts & labor warranty.

1 – SPEED RAIL/ RACK
Glastender Model No. SSR-30 Single Speed Rail, 30″W, open step-and-rail design, ABS sounddeadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, Ell-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – DRAINBOARD
Glastender Model No. DBB-18 Underbar Drainboard, free standing, 18″W x 24″0, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, Ell-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – BOTTLE DISPLAY
Glastender Model No. LDB-18 Underbar Liquor Bottle Display Unit, free standing, 18″W x 24″0 (aligns with 24″ deep units without speed rail), (4) steps, extra-wide rear step, includes clear lift-off liquor-identification cover, stainless steel
construction, stainless steel legs with adjustable bullet feet, ETLSanitation
Note: Purchased new with 1 year parts & labor warranty

1 – CORNER ANGLE FILLER
Glastender Model No. IFC-19/30R Underbar Full Corner Drainboard, dimensional, 90″ angle, 19″ deep, with backsplash, 19″ left & 30″ right, stainless steel construction, no legs (mounts between two adjacent underbar pieces), Ell-Sanitation CB-LEG Deep Corner, 24″ deep, finished side & leg set on right, stainless steel
Note: Purchased new with 1 year parts & labor warranty

1 – DRAINBOARD
Glastender Model No. DBA-24 Underbar Drainboard, free standing, 24″W x 19″0, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, EH-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – SPEED RAIL/ RACK
Glastender Model No. SSR-24 Single Speed Rail, 24″W, open step-and-rail design, ABS sounddeadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, EH-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – DRAINBOARD
Glastender Model No. DBA-18 Underbar Drainboard, free standing, 18″W x 19″0, drain pan with removable perforated insert, stainless steel construction, stainless steel legs with adjustable stainless steel bullet feet, EH-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – SPEED RAIL/ RACK $83.71
Glastender Model No. SSR-18 Single Speed Rail, 18″W, open step-and-rail design, ABS sounddeadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, EH-Sanitation
Note: Purchased new with 1 year parts & labor warranty 1 year parts & labor warranty

1 – BOTILE DISPLA Y
Glastender Model No. LDB-12 Underbar Liquor Bottle Display Unit, free standing, 12″W x 24″0 (aligns with 24″ deep units without speed rail), (4) steps, extra-wide rear step, includes clear lift-off liquor-identification cover, stainless steel construction, stainless steel legs with adjustable bullet feet, ETLSanitation
Note: Purchased new with 1 ea 1 year parts & labor warranty

1 – BOTTLE COOLER
Glastender Model No. ST72-S Flat Top Bottle Cooler, deep well, 72″W x 24″0, self-contained refrigeration, 34°F (1°C) to 40°F (4°C) temperature range, {3) top sliding doors with locks, (4) vertical wire partitions, automatic defrost cycle & condensate evaporator, stainless steel exterior, interior & top, R290 refrigerant, 1/6 HP, cEllus, Ell-Sanitation 1 120v/60/l-ph, 4.5 amps, NEMA 5-15P, standard
Note: Purchased new with 1 year parts & labor warranty, 5 year compressor warranty

1 – CORNER ANGLE FILLER
Glastender Model No. IFC-19/30R Underbar Full Corner Drainboard, dimensional, 90° angle, 19″ deep, with backsplash, 19″ left & 30″ right, stainless steel construction, no legs (mounts between two adjacent underbar pieces), Ell-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – SPEED RAIL/ RACK
Glastender Model No. DSR-24 Double Speed Rail, 24″W, open step-and-rail design, ABS sounddeadening covers, clear snap-on liquor identification label cover, field installed, stainless steel construction, EH-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – PASS-THRU ICE BIN
Glastender Model No. tB-38X24-CP10 Service Station Ice Bin, pass-thru with 10-circuit cold plate, 24″W x 38″0, 175 lbs. ice capacity, 10-1/2″ deep bin, double-sided stainless steel cover, stainless steel construction, Ell-Sanitation
Note: Purchased new with 1 year parts & labor warranty

1 – UNDERBAR ADO-ON UNIT
Glastender Model No. SHP-4 Underbar Soda Gun Holder, Pass-Thru, 4″W x 38″0x18″H, built-in holder for soda gun, includes Integral drip pan, removable cover for access to soda gun manifold (soda gun not included), must mount to at
least one other piece of underbar equipment (no provision for leg mounting), stainless steel construction, Ell-Sanitation

1 – WASTE CABINET
Model No. SWB-12 Wet Waste Sink Unit, 12″W x 24″0, 9-1/4″ wide x 11-1/2″ front-to-back x 6″ deep bowl, 7″H backsplash, deck mount gooseneck faucet (low lead compliant), lift-out plastic perforated sink strainer,stainless steel construction, legs with adjustable bullet feet, Ell- Sanitation, NSF/ANSI 61, Annex G Aerator, faucet, 2.0 GPM, standard
Note: Purchased new with 1 year parts & labor warranty

56 – BAR STOOLS
Oak Street Model No. OD-BM-820-PNT-XL XL Brewhouse Stacking Bar Stool, Indoor/outdoor, metal back & seat, metal frame, footrest, non-marring poly glides, silver bullet paint
Note: Purchased new with 1 yr. warranty against defects in material and workmanship, std.

65 – CHAIRS
Oak Street Model No. OD-CM-820-PNT XL Brewhouse Stacking Dining Chair, indoor/outdoor, metal back & seat metal frame, non-marring poly glides, silver bullet paint
Note: Purchased new with 1 yr. warranty against defects in material and workmanship, std.

Items In Catalog (Some Items Being SOLD May Not Appear In Cagalog)
Photos Restaurant Furnishings, Decor & Much More!

« of 16 »

Can’t Attend Auction In Person or Bid LIVE Online?  No Problem!
We NEVER Restrict Participation At Our Client’s Aucitons!
We Welcome LIVE Internet Bidding, Absentee Bidding, Phone Bids
AND Payment With Credit Card!

BID LIVE ONLINE or ABSENTEE

*Food & Drinks Available

Hours of Operation

MON – FRI
10:00am – 1:00pm
4:00pm – 10:30pm

SAT
3:00pm – 10:30pm

SUN
We are closed

Drop Us a Line

Don’t be shy. Let us know if you have any questions!

Subscribe To Our Newsletter